MFE-S多功能型電磁流量計的轉換器采用了信號處理技術和高性能微處理器，其傳感器勵磁方式和信號處理系統，能夠消除噪音等干擾信號，可以保證測量流量的準確性和穩定性。

主要參數

產品特點

1、測量管內無阻流及活動部件，因此不會造成額外的能量損失，也不會造成堵塞。

Neither additional energy loss nor clogging will be caused due to the absence of flow restriction and moving parts in the measuring tube.

2、安裝要求低前直管段只要5D，后直管段為2D。

Low installation requirements: 5D for the front straight pipe section and 2D for the rear straight pipe section.

3、測量準確度高，可達示值的±0.2%，而且可測量正/反兩個方向的流量。

High measurement accuracy, up to ±0.2% of the indicated value, and available for measuring forward and reverse direction flows.

4、儀表采用雙頻勵磁方式，不受工頻的影響，工作穩定可靠。

Dual-frequency excitation mode, no influence from power frequency, and work stably and reliably.

5、測量范圍寬，可達1500:1。

Wide measuring range of up to 1,500:1.